Best Gimbal for Canon EOS M50 II

We independently review everything we recommend. When you buy through our links, we may earn a commission.

It’s no secret that the Canon M50 II has amassed a sizable market share since its launch, and the fantastic small camera continues to improve as the months pass. With so many vloggers switching from their Canon G7X or Sony RX100 to the Canon M50, and so many people just picking it up because it’s a wonderful piece of gear, we’ve seen a lot of people asking for recommendations on the best gimbal for the Canon M50.

Now, unlike our previous gimbal suggestion pieces, where we can pretty much cut to the chase with some camera body recommendations, the Canon M50 II is a bit of a grey area due to its bodyweight of little over one pound. This implies that, despite the fact that it is a mirrorless camera, you may be able to place it on a gimbal built for a point-and-shoot camera, such as the Zhiyun Crane M2 or the Feiyu Tech g6.

Now, although this may save you a tiny bit of money on your gimbal, it will severely limit the lenses and other accessories that you can install on your m50 II because it only leaves around half a pound of payload weight available. As a result, even if the camera is on the lighter end of the mirrorless camera weight scale, we always recommend using one of the mirrorless camera gimbals included in the comparison table below to guarantee that you may use whatever accessories you like with your m50 II.

Best Gimbal for Canon EOS M50 II


1. Zhiyun Crane 2 [Official] Handheld Gimbal Stabilizer for DSLR &Mirrorless Camera Like Sony A7M3 A7R3 A7 III A9 Nikon D850...

Last update was on: May 4, 2022 1:41 am
  • Both Digital and Mechanical Follow Focus
  • Intuitive OLED Display
  • Innovative Quick Control Dial Design
  • 18 Hour Runtime for Longtime Task
  • Friendly Customer Support and Worry-free Warranty from Zhiyun Offcial

2. Zhiyun Crane 2 3-Axis Handheld Gimbal Stabilizer for DSLR Mirrorless Camera Compatible with Sony A9 A7iii Panasonic Nikon Canon-2021 Version

Last update was on: May 4, 2022 1:41 am
  • 【3.2KG Max Payload】Empowered by the Intune Algorithm System, The Crane 2 supports a max. the payload of 3.2kg, mountable by all models of DSLR and mirrorless cameras on the market
  • 【Full-range POV】Crane 2 brings a whole new perspective to POV mode. The full-range 360°synchronous movement on all three axes gives you an immersive experience like using an “intelligent” Steadicam
  • 【Digital Follow Focus】Integrated with an unprecedented follow focus wheel and attached Servo Follow Focus(No included), Crane 2 allows ±0.02° real time follow focus for brands like Canon, Sony, Panasonic, and Nikon, etc
  • 【Intuitive OLED Display】The intuitive interface design help you easily identify the connection status, battery level, control mode, and multiple camera params, giving you full control over every detail
  • 【Durable Quick Release Plate】which allows you to mount your camera quickly to the stabilizer or tripod nice and tight simply with a sliding of the plate and reassembling within 60 seconds

3. DJI Ronin-SC Pro Combo - Camera Stabilizer 3-Axis Gimbal Handheld for Mirrorless Cameras up to 4.4 lbs / 2kg Payload...

$399.00 in stock
7 new from $379.99
Last update was on: May 4, 2022 1:41 am
  • The Ronin-SC stabilizer for mirrorless cameras supports a wide range of cameras and lenses. It has been rigorously tested to support a payload of 4.4 lbs / 2.0 kg while still achieving a smooth, cinematic shot.
  • Offers a suite of advanced capturing features to unleash your imagination like Panorama, Timelapse, Motionlapse, Motion Control, ActiveTrack 3.0
  • Axis locks on each arm allow for faster storage and individual axis balancing. The Quick-Release Plate includes a positioning block to memorize the perfect camera position for instant remounting.
  • Use the Ronin App to get access to preset scenarios, and the camera balancing guide, along with tutorials to help users master their handheld gimbal. The app also minimizes hardware tuning, setting filmmakers free to produce great footage.
  • Compatible with - Canon: EOS M50, M6 Mark II, R, RP; Fujifilm: X-E3, X-H1, X-T2, X-T20, X-T3, X-T30; Nikon: Z50, Z6, Z7; Panasonic: G9, G95, GH3, GH4, GH5, GH5S;Sony: A6000, A6100, A6300, A6400, A6500, A6600, A7, A7M2, A7M3, A7R2, A7R3, A7R4, A7S, A7S2, A9, Rx10 III, Rx10 IV, RX100 V, Rx100 VI, Rx100 VII.What you get: DJI Ronin-SC, BG18 Grip (Built-in Battery), Extended Grip/Tripod (Plastic), Quick-Release Plate, Camera Riser, Carrying Case, Phone Holder, Lens Support, 2x 8-pin Port Cover, 2x Wrench, 3x Camera Screw 1/4"-20, 4x Screw M4, Multi-Camera Control Cable (Multi-USB), Multi-Camera Control Cable (Type-C), USB-C Cable, Multi-Camera Control Adapter (Type-C To Micro USB), Focus Motor, Focus Motor Rod Mount, Focus Wheel, Focus Gear Strip, 6x Screw, RSS Splitter.DJI Ronin App requires iOS 9.0, Android 5.0 or above Compatible devices include: iPhone 11 Pro Max, 11 Pro, 11, XS Max, XS, XR, X, 8 Plus, 8, 7 Plus, 7, 6s Plus, 6s, 6 Plus, 6, SE, iPad Mini 4, iPad Pro, Samsung Galaxy S10+, S10, S9+, S9 , S9+, S9, S8+, S7, Note8, Note9, S5, S6 edge, A9, Google Nexus 6P, Huawei P30 Pro, P30, P20 Pro, P10, P9, Mate 20, Mate10, Mate 9 Pro, Nova 3e, MT7-TL00, Honor V10, Magic 2, Vivo X21A, X27, NEXS, Oppo Find X, R15, R11, Xiaomi 8, Xiaomi Max2, Xiaomi Max3, Xiaomi MIX3, Xiaomi MIX2S, LG V20.

4. DJI Ronin-SC - Camera Stabilizer, 3-Axis Handheld Gimbal for DSLR and Mirrorless Cameras, Up to 4.4lbs Payload, Sony, Panasonic Lumix,...

$279.00 $439.00 in stock
13 new from $275.00
6 used from $239.99
Free shipping
Last update was on: May 4, 2022 1:41 am
  • Lightweight and Compact - Opening possibilities for filmmakers and content creators in almost any situation, Ronin-SC was built to go anywhere.
  • Tracks the Action - The Ronin app, and Ronin-SC work together seamlessly to achieve smooth, precise gimbal movement at all times, allowing you to focus more on creating the shot that matches your vision.
  • Dynamic Stability - Even in action-packed scenes, Ronin-SC gives a perfectly stable shot. Continuous stabilization makes Ronin-SC more effective in fast follows, sudden motions, and even complete changes in direction.
  • Automated Features - Ronin-SC offers a suite of advanced capturing features to unleash your imagination.
  • Easy to Handle - The buttons and trigger are easy to reach for every essential control. A flared battery grip makes extended holding easier and slip-resistant, letting you capture moments throughout the day.
  • Compatible with Most Cameras - DJI Ronin App requires iOS 11.0, Android 7.0 or above. Compatible devices include: Canon: EOS M50, M6 Mark II, R, RP; Fujifilm: X-E3, X-H1, X-T2, X-T20, X-T3, X-T30; Nikon: Z50, Z6, Z7; Panasonic: G9, G95, GH3, GH4, GH5, GH5S;Sony: A6000, A6100, A6300, A6400, A6500, A6600, A7, A7M2, A7M3, A7R2, A7R3, A7R4, A7S, A7S2, A9, Rx10 III, Rx10 IV, RX100 V, Rx100 VI, Rx100 VII.
  • DJI Ronin App requires iOS 9.0, Android 5.0 or above Compatible devices include: iPhone 11 Pro Max, 11 Pro, 11, XS Max, XS, XR, X, 8 Plus, 8, 7 Plus, 7, 6s Plus, 6s, 6 Plus, 6, SE, iPad Mini 4, iPad Pro, Samsung Galaxy S10 Plus, S10, S9 Plus, S9 , S9 Plus, S9, S8 Plus, S7, Note8, Note9, S5, S6 edge, A9, Google Nexus 6P, Huawei P30 Pro, P30, P20 Pro, P10, P9, Mate 20, Mate10, Mate 9 Pro, Nova 3e, MT7-TL00, Honor V10, Magic 2, Vivo X21A, X27, NEXS, Oppo Find X, R15, R11, Xiaomi 8, Xiaomi Max2, Xiaomi Max3, Xiaomi MIX3, Xiaomi MIX2S, LG V20.

5. DJI Ronin-SC Pro Combo (CP.RN.00000043.01)

$399.00 in stock
2 new from $399.00
1 used from $459.00
Last update was on: May 4, 2022 1:41 am
  • Lasts up to 11 Hours
  • Battery Grip for Ronin-SC Gimbal
  • 7. 2V, 2450mAh Lithium-Ion Battery
  • Max focal length: 35.0

6. MOZA AirCross 2 Professional Kit Handheld Stabilizer with iFocusM Motor Lightweight Gimbal Up to 7Lb Auto-Tuning Intuitive Control Panel 12H...

$399.00 in stock
2 new from $399.00
Last update was on: May 4, 2022 1:41 am
  • 【LIGHTWEIGHT POWERFUL & iFocusM Motor】 :The magnesium-alloy integrated technology allows MOZA AirCross 2 to provide robust performance at just 950g (2 lbs) and can achieve seamless cinematic shots with one hand. Featuring a superior motor with a 3.2kg (7 lbs) payload capacity, the MOZA AirCross 2 is capable of supporting most mirrorless and DSLR cameras on the market, Package come with iFocusM Motor. We provide 1 year warranty for MOZA AirCross 2 Gimbal Professional Kit
  • 【 MOZA SPARK POWER SUPPLY SYETEM 2.0 】:The 3000mAh high-capacity battery provides the MOZA AirCross 2 with up to 12 hours of battery life and it can be fully charged in only 1.5 hours with an 18W fast charger. The battery features its own USB charging interface and can be charged by the external power supply. Simple and convenient, it can be utilized anytime, anywhere. Three Multi-CAN outputs with a 7.8V power supply can supply power to cameras and other accessories
  • 【INCEPTION MODE 3.0】 The improved Inception Mode 3.0 now features automatic rotation, speed adjustment, and angle control. It is no longer necessary to manually control the joystick during shooting
  • 【MIMIC MOTION CONTROL】:By using a smartphone, you can control the movement of MOZA AirCross 2 through the device with the internal somatosensory switch, so each axis can be independently controlled to mimic the movement from your phone. You can also adjust the sensitivity of the gimbal movement, allowing more control and precision for each shot
  • 【INTUITIVE CONTROL PANEL】 :With the smart wheel, you can easily control two follow focus system as well as enable to, via camera cable, to control the camera’s follow focus (E-Focus). In Addition, you can quickly switch and control each individual axis (pan, tilt, roll) for precision movement by simply moving the smart wheel. The OLED screen provides an intuitive, bright, display of the gimbal status and camera parameters. Complete control over every detail has never been easier

7. MOZA AirCross 2 Professional KIT 3-Axis Gimbal Stabilizer Compatible with DSLR and Mirrorless Camera, Nikon Sony Panasonic Canon etc /...

Last update was on: May 4, 2022 1:41 am
  • 【COMPACT DESIGN&SUPERIOR STABILIZATION】The magnesium-alloy integrated technology allows MOZA AirCross 2 to provide robust performance at just 950g (2 lbs) and can achieve seamless cinematic shots with one hand.
  • 【WIDE RANGE OF CAMPATIBILITY】Featuring a larger camera mounting space, the MOZA AirCross 2 is compatible with a wide range of cameras and lens.
  • 【POWER SUPPLY SYSTEM 2.0】The 3000mAh high-capacity battery provides the MOZA AirCross 2 with up to 12 hours of battery life and it can be fully charged in only 1.5 hours with an 18W fast charger.
  • 【INTUITIVE CONTROL PANEL】With the smart wheel, you can easily control two follow focus system as well as enable to, via camera cable, to control the camera’s follow focus (E-Focus). In Addition, you can quickly switch and control each individual axis (pan, tilt, roll) for precision movement by simply moving the smart wheel.
  • 【THREE-AXIS LOCK DESIGN】Three-axis lock design makes a difference and saves your time. The latch on each axis allows for custom balancing configurations. Video creators on the go can now easily carry MOZA AirCross 2 without worrying about re-configuring their setup.

8. MOZA Aircross 2 DSLR Gimbal Stabilizer for Mirrorless Camera 3 Axis up to 7lbs/3.2kg Payload and 12hrs Lightweight Mimic Motion-Control...

$379.00 in stock
1 new from $379.00
Free shipping
Last update was on: May 4, 2022 1:41 am
  • 【Multiple Function&Modes】 Features with the upgrade inception mode 3.0, functions such as angle control, automatic rotation and speed adjustment become available. Once you're ready to vlog, there are plenty advanced shooting modes like mimic motion control, object tracking, sport gear mode, FPV mode allow you to explore.
  • 【Fast Charging&Long Run time】 The MOZA aircross 2's spark power supply system 2.0 equipped with a 3000mAh high capacity battery can run up to 12 hours with only 1.5 hours 18W fast charger.
  • 【Lightweight yet Fully Featured】 AirCross 2 is a good example blending a lightweight build with impressive depth of functionality. It specifically designed for mirrorless camera setups up to 2 lbs(950 g) in total weight. While it compatible with many Camera models as it has a 7 lbs payload capacity.
  • 【OLED Screen Control】 An OLED status LCD screen for quick checking of settings, it provides a simple display of gimbal status and parameters. You can easily set and switch each axis by simply moving the smart wheel.
  • 【Easy to Set Up】 Due to the Auto-tuning and balance check 2.0, you can easily set up no matter you are a beginner or master of video making. And its design allows the camera to move in 360 degrees in all directions, allowing for total freedom of movement while shooting.

Tags:

Lewis
We will be happy to hear your thoughts

Leave a reply

TopBestProductReview
Logo